Our new Classic Auto Fuse Series Dash Harnesses allow the professional restorer to maintain the plug and play functionality of the original factory type harnesses, while converting the entire fuse block to an Auto Fuse Series (ATO Type) fuse block. The Classic Auto Fuse Series Dash Harnesses give restorers the flexibility to add additional power circuits, without the installation headaches normally associated with this type of fuse box conversion.
The plug and play Classic Auto Fuse Series Dash Harness are a first in the industry. Don’t be fooled by clever advertising and claims by others that their do-it-yourself harnesses are easy to install. There is no other product like this on the market, anywhere.
ATO Type Fuse Block with additional, fully integrated power ports allows the restorer to easily tap power for aftermarket electronic devices such as electric radiator fans, fuel pumps & ignition boxes.
An Original Factory Bulkhead Connector is used on the back of the ATO Fuse Block. This allows the restorer to maintain the plug & play functionality of factory original style Engine & Forward Harnesses.
We use U.S.A. made GXL wire which is much more tolerant to heat than the original GPT type wire that was used from the factory. Wire colors match the original factory specs, as does every connector and terminal.
Adds six additional ATO fuse positions for aftermarket accessories or other circuits when more fused capacity is needed. The fuse block mounts directly to the 40mm rails on compatible Classic Auto Fuse Series fuse blocks and includes configurable terminal bus bars for flexible circuit distribution.
Provides a secure 11-circuit disconnect for added electrical accessories. The female connector mounts to the 40mm fuse block rails, allowing the mating connector to be plugged or unplugged while the mounted half remains securely in place for convenient service.
Provides a convenient multi-circuit disconnect for aftermarket accessories and electrical equipment. Up to 15 circuits can be connected through a single disconnect or separated into 11-way and 4-way groups, with the assembly mounting directly to compatible 40mm fuse block rails.
Provides an organized way to add one or two relay-controlled electrical accessories, including electric fans, fuel pumps and auxiliary lighting. The adapter mounts directly to compatible 40mm fuse block rails and may also be used as a stand-alone in-line relay assembly.
Includes indexed connectors and terminals that plug into dedicated accessory ports on the front of the Classic Auto Fuse Series fuse block. The color-coded connections make it easier to add accessories to the proper power source while helping prevent connections to the wrong cavities.
Complete fuse, flasher and circuit breaker assortments matched to 1967-1978 Chevy Truck Classic Auto Fuse Series Dash Harnesses. Three kits cover 1967-1972, 1973-1974 and 1975-1978 applications and include the required ATO fuses, turn signal and hazard flashers, circuit breakers and spare fuses.
Creates a clean, organized connection point for multiple accessories using five indexed, color-coded connectors. The junction block can distribute a common feed or separate power and ground circuits, mounts to compatible 40mm rails and may also be used as a stand-alone in-line junction block.
Adds a heavy-duty SPDT relay and removable 5-way relay connector for controlling higher-current electrical accessories. The connector mounts to compatible Classic Auto Fuse Series fuse block rails and includes the required terminals and secondary lock for a secure, serviceable installation.
Keeps up to five spare ATO fuses organized, protected and readily accessible near the fuse block. The covered holder mounts directly to compatible 40mm rails for a clean, integrated installation and convenient access when a replacement fuse is needed. Spare fuses are not included.